News & Events

Innovative Memories
& Embedded Systems

3D TLC  Press Release

Rugged 2.5” and M.2 Flash drive with NVMe/PCIe interfaces,

Asine announces new product

(23rd December, 2018) – Asine, a leading manufacturer of FLASH drives for the most demanding environments, delivers a rugged 2.5” and M.2 Flash drive with NVMe/PCIe interfaces.  The AS-M2-NVMe comes in 2280 Form Factor and offers up to 2TB. The 2242 offers up to 500GB of flash memory. The 2.5” comes in SATA3 and offers up to 2TB flash memory. The Standard build options include: Commercial and Industrial temperature -40oC to +85oC, PLP (Sudden Power Off Recover), AES256, OPAL as well as Conformal Coating and Fast/Secure Erase ATA and optional Conduction Cooling.

new product rugged2.5

 

RUGGED SATA3 and NVMe/PCIexpress High Endurance 3D TLC FLASH disk is ideal for demanding embedded applications.

(23rd December, 2018) – Asine, a leading manufacturer of FLASH drives for the most demanding environments, delivers a rugged 2.5” and M.2 Flash drive with NVMe/PCIe interfaces.  The AS-M2-NVMe comes in 2280 Form Factor and offers up to 2TB. The 2242 offers up to 500GB of flash memory. The 2.5” comes in SATA3 and offers up to 2TB flash memory. The Standard build options include: Commercial and Industrial temperature -40oC to +85oC, PLP (Sudden Power Off Recover), AES256, OPAL as well as Conformal Coating and Fast/Secure Erase ATA and optional Conduction Cooling.

The NVMe / PCIe Gen3 interface offers 30Gbps using x4 lanes available. Sustained reads in practice of 2700MB/s, writes of 1700MB/s. Fast sanitize erase for entire media typically only takes a few second while AES-256 bit encryption secures data.

The Asine 3D TLC product literally rises above the competition with an operating altitude of 80,000ft and down to -1,000ft.

Our Enhanced Endurance triples the standard endurance of other 3D TLC SSDs.

The ASINE 3D TLC SSD are built on the proven success of Asine rugged SATA3 and NVMe designs in both M.2 and 2.5"  formats. When combined with BOM control and a history of supporting products for 19+ years, Asine customers enjoy reassurance of product longevity, reliability and support.

Asine works in partnership with customers to ensure best performance over the life cycle of their system. Dependability is built-in to satisfy the demanding requirements of C4ISR, medical imaging and industrial applications requiring fast secured data storage.

“The 3D NANDs and eNANDs have emerged as an effective next-step in access speeds and cost” Said Shlomo Haddad, CEO and Tech-founder of Asine. “Since 1999 Asine has been at the forefront of rugged FLASH in demanding environments. Our proven success in the field reassures customers that we appreciate the need for long term supply and support as well as access to continuously evolving technology.”

For more information, please visit

https://www.asinegroup.com/products/industrial-memory-and-storage/board-level-solid-state-disk/asine-s-m-2-nvme

https://www.asinegroup.com/products/industrial-memory-and-storage/ssd/2-5%E2%80%9D-as25-sata,-pata-sata3

About Asine Ltd:

Asine Ltd is a global innovative company that delivers highly engineered and reliable rugged FLASH storage products to the commercial, industrial & defense markets. Since 1999 Asine has combined design of innovative products while keenly appreciating the importance of long-term supply and support.  For more information, visit www.asinegroup.com

Press Contact:    email: This email address is being protected from spambots. You need JavaScript enabled to view it.  

Features for the SATA M.2 & 2.5” products:

  •  Highest quality 3D TLC Flash technology
  •  240GB to 2TB @ 2.5” ; 16GB-500GB @ M.2-2242 ; 120-2000GB M.2-2280 and M.2 type D5-BM
  • I/F SATA1/2/3, Protocol SATA 3.2
  •  Securuty: AES256; Secure Erase support; ATA8 security feature set (2.5”) ; User selectable ATA password support (M.2) ; Optional OPAL
  •  Operating temperature – Commercial 0°C to 70°C, Industrial -40°C to +85°C
  • Storage temperature -40°C to +85°C
  • Humidity 5% to 95% relative, non-condensing
  •  High data transfer rate: Sustained Read up to 560MB/S, Write up to 520MB/Sec.  (capacity & file system dependent)
  • Random 4KB block size –
    • 2.5” - Read: Up to 100K IOPS. Write: Up to 91 IOPS
    •  M.2 - Read: Up to 80K IOPS. Write: Up to 81 IOPS
  •  Reliability - MTBF - 1,500,000 hours
    • Embedded EDC/ECC, support up to 64-bit BCH Algorithm for Error
    • Built-in power-up self test and automatic self-diagnostics
    • Wear-Leveling Algorithm: Dynamic & Static wear leveling
  •  Power: 0.1W on Idle. Operation max. 2.1W
  • ·TBW by JESD218 standard with 4KB random write workload –

o   2.5”/ M.2-2280 2TB: up to 1360 TBW. Enterprise: 3560TBW or 5500 TBW

o   M.2-2242 up to 500 TBW for 500GB. Enterprise: 2750 TBW @ 500GB

  • No special drivers - uses existing Windows, Linux, VxWorks®, and SATA drivers
  • Heat dissipation balancing for demanding applications
  • SSD unit sustain environmental
    • Shock (operating and non-operating) 1,500 G/0.5ms
    • Vibration - Operating: 2-500Hz, 3.1G
    • Non-operating: 3.1 Grms (5-800Hz)
    • Non-operating: 3.13 GRMS (5-800Hz)

 

Features for the NVMe / PCIe M.2 products:

 Highest quality 3D TLC Flash technology

  •  240GB to 2000GB at TLC of non-volatile Flash memory at M.2 type D5-M
  • Interface PCIe Gen3 x4 lane NVMe 1.3 compliant NVMe Secure Erase support
  •  Securuty: AES256 ; compliant NVMe Secure Erase support ; Optional OPAL
  • Operating temperature: Commercial 0°C ~ +70°C, Industrial -40°C ~ +85°C (Tc)
  • Storage temperature -40°C to +85°C
  • Humidity 5% to 95% relative, non-condensing
  • High data sustained transfer rate: TLC Sequential Read up to 2700MB/Sec sequential Write up to 1750MB/Sec
  • Random 4KB block size - Read: Up to 335K IOPS. Write: Up to 280K IOPS
  • Reliability – MTBF 1,500,000 hours
    • Embedded EDC/ECC Bad Block Mapping and Management
    • Built-in power-up self test and automatic self-diagnostics
    • Wear-Leveling Algorithm: Dynamic & Static wear leveling
  •  Power Consumption: up to 5.7 (Active), 0.3W (Idle)
  •  TBW by JESD218 standard with 4KB random write workload – up to 900TBW @ 2TB ; Enterprise 2180 TBW @ 1TB
  •  No special drivers - uses compliant NVMe Windows, Linux, VxWorks® drivers
  • ·SSD unit sustain environmental – Operating and non-operating:
    • Shock (operating and non-operating) 1,500 G/0.5ms
    • Vibration - Operating: 2-500Hz, 3.1G
    • Non-operating: 3.1 Grms (5-800Hz)