Asine's M.2 SSD is suitable for embedded storage applications which require a storage solution in small and removable form factor. With small physical dimensions, the M.2 provides flexibility in the design phase without any compromise on high reliability and performance. The ASM.2 is ideal to meet the reliability requirements for defense, aerospace, automotive, HLS, video servers, broadcasting systems, and enterprise computing.

The ASM.2 supports a variety of features for OEM applications such as AES-256 bit hardware encryption, fast sanitize erase, conformal coating, locked BOM, and more.

Features

  • Highest quality pSLC & MLC flash technology
  • 32GB to 512GB of non-volatile (per model) flash memory at M.2 form factors
  • SATA1, SATA2 & SATA3 interfaces, protocol SATA 3.1 AHCI
  • All modes to PIO & UDMA6 of SATA interface, ATA8 standard compliance
  • Fast sanitize erase for entire media (few seconds typical) capacity dependen
  • Operating temperature – commercial 0°C to +70°C, industrial -40°C to +85°C, and optional: extreme up to +95°C case
  • Storage temperature -50°C to +85°C
  • Humidity 5% to 95% relative, non-condensing
  • Altitude (operating & non-operating) 0 to 80,000 feet
  • Typical 120 µsec access time
  • High data transfer rate: up to sequential read 500MB/sec, write 500 MB/sec (capacity, technology & file system dependent)
  • IOPS 4KB random read or write: 80,000 (capacity, technology dependent)
  • Reliability - MTBF - 2,000,000 hours MIL-HDBK271F
  • Embedded EDC/ECC, support up to 64-bit BCH algorithm for error correction code; bad block mapping and management
  • Built-in power-up self test and automatic self-diagnostics
  • Wear-leveling algorithm: dynamic & static wear leveling
  • Power: up to 1.8 W max. @ 240GB (depending on capacity), 0.5 W on Idle
  • TBW: 128GB-80TBW, 240GB-140TBW, 500GB-600TBW MLC
  • TBW: 240GB-800TBW pSLC SSD
  • Read unlimited
  • No special drivers - uses existing Windows, Linux, VxWorks®, and SATA drivers
  • Heat dissipation balancing for demanding applications
  • SSD unit sustain environmental
  • Shock - half sine, 50G peak, 0.5ms; half sine, 1500G (3 axes)
  • Vibration - 16.3G RMS (random, 20Hz to 2000 Hz, 3 vibrations axes)