The AS-VME/CPCI-800 is a fast flash disk rugged recording board that plugs into a 6U VME / CPCI slot and interfaces via a vast range of common I/O interfaces with more than 8,000 GB storage capacity. Serial or parallel data I/F for capturing or playback of recorded data stream with sustain rate of 1Gbit/דec. The board is controlled via “command channel”.

Asine's VME recording board is designed to meet harsh environmental conditions, conduction cooling, conformal coating, as well as supporting high speed transfer rates and high capacity.

Features

  • 32GB to 8 terrabytes of non-volatile flash memory in a single slot 6U VME / CPCI
  • High speed accumulated recording rates: up to 200 MB/sec (data type dependent)
  • Optional interfaces: LVDS I/O, Rocket I/O, 16/32bit clocked, S-FPDP, 1553 / MAXBUS, Arinc 429, SATA2, fast Ethernet, camera link, video / RS170 / MPEG2 /MPEG4, audio, CAN bus and more - consult factory
  • Fast data erase
  • Reliability - MTBF - targeted to support 200,000 hours
  • Embedded EDC/ECC, based on 48-bit Reed Solomon Algorithm, bad block mapping out algorithms, dynamic wear leveling
  • Built-in power-up self test
  • Manual and automatic self-diagnostics
  • 30W average power dissipation (depending on capacity and data rate)
  • 2,000,000 write/erase cycles; read unlimited
  • Operating temperature – commercial 0°C to +70°C and enhanced -40°C to +71°C
  • Storage temperature -55°C to +95°C
  • Humidity 5% to 95% relative, non-condensing
  • Altitude (operating & non-operating) 0 to 80,000 feet
  • Command set S/W driven interface with management port
  • Long term product lifecycle support
  • Conduction cooled for rugged applications
  • Conformal coating – optional
  • Board is MIL-STD 810F compliant
  • Shock - 2G, 11msec, saw-tooth MIL-STD-810E - Method 516.4 3 shocks at each direction of 3 orthogonal axes
  • Vibration – -6db slop from 0.1 G2/Hz to 0.01 G2/Hz (MIL-STD-810F, method 514.5 random, 15Hz to 2000 Hz, 3 vibrations axes)