|
|
 |
|
ASPMC-610
is a Flash Disk SCSI / IDE storage PMC module board
|
The ASPMC610 SCSI / IDE Fast Flash Disk PMC modules plugs into a single PMC slot and interfaces via Single Ended SCSI2 or IDE. The Fast Flash Disk (FFD) can be accessed through direct SCSI/IDE interfaces. In order to allow backplan I/O as well as PMC front panel connector, the ASPMC610 SCSI/IDE interface utilizes PMC Jn4 IEEE1386 defined connector. ASPMC610 Jn4 I/O enables routing by its carrier to both VME-P2 and cPCI-J3/J5 backplane connectors. Asine storage systems deliver performance and proven reliability for data and mission critical systems. Added benefits of flexibility are built into Asine PMC storage systems, including easy field firmware upgrades and expandable storage capacity as flash disk capacities increase. Supporting OEM specific application features such as conformal coating, conduction cool ready, on-board termination, TERM Power and more. The ASPMC610 carries 3 years warranty.
|
Airborne and naval systems
|
|
Telecommunications switches
|
|
Data acquisition systems
|
|
CNC manufacturing equipment
|
|
Shipboard fire control systems
|
|
Laboratory instrumentation
|
Features:
|
256MB to 2,816MB (SCSI) / 3,072MB (IDE) of Flash Disk in a single PMC slot.
|
|
Less than 100 µsec (SCSI) and 40 µsec (IDE, PCI) access time
|
|
High data transfer rate – up to 16.7MB/Sec Burst R/W, 3.6MB/Sec (SCSI) & 8.2MB/Sec (IDE, PCI) Sustained Read, 2.2MB/Sec (SCSI) & 9.8MB/Sec (IDE, PCI) Sustained Write
|
|
Fast erase - 10 sec entire media (typical)
|
|
Reliability - MTBF > 600,000 hours (MIL-HDBK-217F, 87,600 hours mission)
|
EDC/ECC On-the-fly H/W & S/W Embedded EDC/ECC utilize 48bit Reed Solomon algorithm
|
|
Built-in power-up self test
|
|
Manual and automatic self-diagnostics
|
|
TrueFFS® Bad Block Mapping out algorithms
|
|
Dynamic wear leveling
|
|
|
2.9 W (SCSI) & 3.8 W (IDE, PCI) max power dissipation (depending on capacity)
|
|
1,000,000 Write/Erase cycles; Read unlimited
|
|
Operating temperature – Commercial 0°C to +70°C, Enhanced -25°C to +75°C and Extended -40°C to +85°C
|
|
Storage temperature -55°C to +95°C
|
|
Humidity 5 to 95% relative, non-condensing
|
|
Altitude (operating & non-operating) 0 to 80,000 feet
|
|
ANSI SCSI-2 & self termination feature and IDE-DMA2 & PIO 0-4 standard interfaces
|
|
O.S. drivers - uses existing Windows, VxWorks®, Sun-Solaris SCSI/IDE drivers
|
|
Long term product life cycle support
|
|
Conduction cooled ready for harsh and rugged applications
|
|
Conformal coating – optional
|
|
FFD unit MIL-STD 810F Compliant
|
Shock - Half Sine, 50G, 11ms; Half Sine, 1320G, 0.5ms
|
|
Vibration - 16.3G RMS (Random, 20Hz to 2000 Hz, 3 vibrations axes)
|
|
|
Warranty - 3 Years
|
ASPMC610 takes advantage of the M-systems FFD (Fast Flash Disk) top reliable high performance mass storage Solid State Disk based on Flash technology. The FFD is designed to withstand extreme shocks, vibrations and harsh environmental conditions while operating without compromising data integrity.
For more information click here
Back to top
|
|
