Rugged                                                    << Previous Product - Next Product >>

AScPCI-615/635
is a Flash Disk SCSI/IDE storage 3U cPCI board

The AScPCI615/635 Narrow SCSI / IDE Fast Flash Disk is a single-slot compactPCI 3U board. The fast Flash Disk (FFD) can be accesed via a single ended, narrow SCSI or IDE interfaces via front panel 44 pin or 50 pin connector. Asine storage systems deliver performance and proven reliability for data and mission critical systems. Added benefits of flexibility are built into Asine SCSI storage systems, including easy field FFD firmware upgrades, secure erase and expandable storage capacity as flash disk capacities increase. The AScPCI615/635 supports OEM application specific features such conformal coating (option F), SCSI on-board termination & TERM Power, IDE Master/Slave setup and more. In addition to world wide support the AScPCI615/635 carries a 3 year warranty.

  		• Military & airborne systems
  		• Telecommunications
  		• Data acquisition systems
  		• Factory automation
  		• Automative
  		• Testing instrumentation


    Features:

  		•  0.5GB to 6 GB (SCSI) / 0.2GB to 16GB (IDE) of non-volatile Flash Disk memory in a single cPCI 3U slot
  		• Less than 100 µsec (SCSI) and 40 µsec (IDE) access time
  		• High data transfer rate – 16.7 MB/Sec Burst R/W, 17 MB/Sec (SCSI) & 8.2 MB/Sec (IDE) Sustained Read, 11.5 MB/Sec (SCSI) & 9.8 MB (IDE) Sustained Write
  		• Fast erase - 10 sec entire media (typical)
  		• Reliability - MTBF - 600,000 hours (MIL-HDBK-217F, 87,600 hours mission)
  		• EDC/ECC On-the-fly H/W & S/W Embedded 48bit Reed Solomon algorithm
  		• Built-in power-up self test
  		• Manual and automatic self-diagnostics
  		• TrueFFS® Bad Block Mapping out algorithms
  		• Dynamic wear leveling
  		• 2.9 W (SCSI) & 3.8 W (IDE) max power dissipation (depending on capacity)
  		• 5,000,000 Write/Erase cycles, Read unlimited
  		• Operating temperature – Commercial 0°C to +70°C, Enhanced -25°C to +75°C and Extended -40°C to +85°C
  		• Storage temperature -55°C to +95°C
  		• Humidity 5 to 95% relative, non-condensing
  		• Altitude (operating & non-operating) 0 to 80,000 feet
  		• ANSI SCSI-2 Single Ended operation & self termination features or IDE-DMA2 & PIO 0-4 standard interfaces
  		• No special drivers - uses existing Windows, VxWorks®, and other OS drivers
  		• Long term product life cycle support
  		• Optional special pinout & interface connectors to customer’s requirement
  		• Conformal coating – optional
  		• FFD unit MIL-STD 810F Compliant
  		• Shock - Half Sine, 50G, 11ms; Half Sine, 1500G, 0.5ms
  		• Vibration - 16.3G RMS (Random, 20Hz to 2000 Hz, 3 vibrations axes)
  		• Warranty - 3 Years

    AScPCI615/635 takes advantage of the M-systems FFD (Fast Flash Disk) top reliable high performance mass storage Solid State Disk. The FFD is designed to withstand extreme shocks, vibrations while operating without compromising data integrity, providing top disk performance and capacity.

    For more information click here


    Back to top